eBike Conversion Kits: Everything You Need To Know

In recent years, there has been an electrifying shift in the way we think about commuting and leisurely rides.

The era of the eBike has dawned upon us, and it’s more than just a passing trend; it’s a revolution in sustainable transportation and outdoor recreation.

As urban landscapes evolve and the call for eco-friendly alternatives grows louder, eBikes have emerged as a compelling solution, offering a blend of convenience, health benefits, and reduced carbon footprint.

However, for those of us who already own beloved bicycles, the prospect of joining this eBike movement may seem daunting and expensive.

This is where eBike conversion kits come into play, opening the doors to a world of electrified cycling without the need to purchase an entirely new bike.

In this article, we will delve into the world of eBike conversion kits, exploring their rising popularity and the numerous advantages they offer for both seasoned cyclists and newcomers to the eBike scene.

Join us as we unravel the potential of eBike conversion kits and unlock a more sustainable, efficient, and exhilarating way to traverse our modern landscapes.

The Rise of eBikes

The eBike revolution has been quietly sweeping across the globe, redefining the way we perceive cycling.

With their electric assist, eBikes offer an enticing alternative to traditional bicycles, bridging the gap between human-powered mobility and modern technology.

This shift in transportation and recreation isn’t just a fleeting fad; it’s a movement grounded in environmental responsibility and improved personal well-being.

Environmental and Health Benefits:

eBikes champion sustainability by reducing our carbon footprint.

They require significantly less energy to operate compared to cars and emit zero tailpipe emissions, making them a clean and green mode of transportation.

As cities grapple with air quality issues and traffic congestion, eBikes emerge as a practical solution to help alleviate these challenges.

On the health front, eBikes are revolutionizing fitness and active lifestyles.

Contrary to misconceptions, eBikes aren’t just for the sedentary; they encourage more people to take up cycling by eliminating barriers like steep hills and long distances.

This inclusivity fosters physical activity, ultimately leading to improved cardiovascular health and reduced sedentary behavior.

Increasing Demand for eBikes:

The surge in eBike popularity is unmistakable.

As people seek eco-friendly alternatives and healthier ways to commute, the market for eBikes has witnessed exponential growth.

Cities are investing in bike infrastructure, bike-sharing programs are embracing eBikes, and commuters are swapping cars for electric-assist two-wheelers.

This growing demand aligns perfectly with the advent of eBike conversion kits.

These kits serve as a bridge between the old and the new, allowing bicycle enthusiasts to upgrade their existing bikes, further fueling the eBike revolution.

In an age where sustainability and personal wellness are paramount, eBike conversion kits offer an accessible entry point into a transformative mode of transportation and recreation, ensuring that everyone can be a part of the eBike movement.

What Are eBike Conversion Kits?

eBike conversion kits are the ingenious solution for those who want to experience the thrill of an electric bicycle without having to invest in an entirely new eBike.

These kits are comprehensive packages that contain all the necessary components and hardware to electrify a conventional bicycle, effectively transforming it into an electric-powered wonder.

How They Work:

At the heart of an eBike conversion kit is an electric motor, typically mounted on the front wheel, rear wheel, or integrated into the bike’s frame as a mid-drive unit.

This motor is connected to a battery pack and a controller. When the rider pedals or engages the throttle (depending on the kit type), the motor provides assistance, augmenting the rider’s pedaling effort with electric power.

This assistance can vary in intensity, making it easy to adapt to different riding conditions, from a leisurely cruise to conquering steep hills.

Types of Conversion Kits:

1. Front-Wheel Conversion Kits: These kits come with a hub motor that replaces the front wheel of the bicycle. They are known for their simplicity and ease of installation, making them a popular choice for beginners. Front-wheel kits are well-suited for flat terrain and city commuting.
2. Rear-Wheel Conversion Kits: These kits also feature a hub motor, but it replaces the rear wheel of the bike. Rear-wheel kits offer better traction, especially on uneven terrain, and can provide a more balanced feel when riding.
3. Mid-Drive Conversion Kits: Mid-drive kits are known for their efficiency and versatility. They integrate a motor into the bike’s bottom bracket, directly driving the chain. This design takes advantage of the bike’s existing gears, making it ideal for tackling hills and challenging terrain. It offers a more natural riding experience, as the motor’s power is applied directly to the pedals.

Compatibility with Various Bicycle Types:

One of the significant advantages of eBike conversion kits is their adaptability.

These kits are compatible with a wide range of bicycle types, from mountain bikes to road bikes, cruisers, and even folding bikes.

Compatibility primarily depends on the kit’s specifications and the bike’s frame size and design.

Most conversion kits come with different options to accommodate various wheel sizes and frame types, ensuring that cyclists can electrify their preferred ride without much hassle.

In essence, eBike conversion kits empower riders to breathe new life into their beloved bicycles, harnessing the power of electricity to enhance their cycling experience and make every journey more enjoyable, efficient, and eco-friendly.

Benefits of eBike Conversion Kits

Converting a traditional bike into an eBike using conversion kits offers a plethora of advantages that not only enhance the overall cycling experience but also contribute to a more sustainable and cost-effective mode of transportation. Here are the key benefits:

1. Cost Savings Compared to Buying a Pre-built eBike:

Investing in a pre-built eBike can be a substantial financial commitment. In contrast, eBike conversion kits provide a more budget-friendly option. By repurposing your existing bicycle, you can save a significant portion of the cost associated with purchasing a new eBike. Conversion kits typically cost a fraction of the price of a fully assembled eBike, making electric biking accessible to a wider range of individuals.

2. Customizability for Your Specific Needs:

One of the standout advantages of eBike conversion kits is the level of customization they offer. With a conversion kit, you have the freedom to tailor your eBike to your specific preferences and requirements. You can choose the motor power, battery capacity, and other components to match your desired riding style, whether it’s for daily commuting, long-distance touring, or off-road adventures. This flexibility ensures that your eBike is perfectly suited to your needs and riding environment.

3. Retaining the Familiarity of Your Existing Bike:

Converting your existing bike into an eBike allows you to retain the familiarity and comfort of the bicycle you know and love. You don’t need to adapt to a new frame geometry, handlebar configuration, or riding posture. This can be especially appealing for seasoned cyclists who have developed a strong connection with their current bikes. The transition to an eBike is seamless, and you can continue to enjoy the same frame and components you’ve grown accustomed to.

4. Highlighting the Eco-Friendly Aspects of Repurposing Old Bikes:

In a world increasingly concerned about environmental sustainability, eBike conversion kits contribute to a greener lifestyle by repurposing old bikes. Rather than discarding or replacing a functioning bicycle, conversion kits extend the lifespan of existing resources. This eco-friendly approach reduces waste and minimizes the carbon footprint associated with manufacturing new bicycles. By converting your old bike into an eBike, you are not only reducing your personal environmental impact but also promoting the ethos of sustainability within the cycling community.

In summary, eBike conversion kits offer a compelling alternative to purchasing a pre-built eBike. They provide cost savings, customization options, familiarity, and eco-friendliness, making them an attractive choice for individuals looking to embrace electric biking while preserving the qualities of their existing bicycles. With conversion kits, you can enjoy the best of both worlds: the convenience of an eBike and the personal touch of a bike you already know and love.

Choosing the Right Conversion Kit

Selecting the perfect eBike conversion kit is a crucial step in your journey to electrify your bicycle. To make an informed decision, it’s essential to consider several key factors that will ensure your converted eBike meets your specific needs and preferences.

1. Power and Range Requirements:

The first consideration is determining the power and range requirements for your eBike. This decision depends on how you intend to use your electrified bicycle. Consider factors like:

• Your daily commute distance.
• The terrain you’ll be riding on (hilly or flat).
• Desired top speed.
• Payload (carrying groceries or cargo).

Different conversion kits offer varying levels of power, often measured in watts (W) or sometimes in torque (Nm). Higher power kits provide more assistance and faster speeds but may drain the battery faster. Assess your needs carefully to strike the right balance between power and range.

2. Battery Types and Capacity:

The battery is the heart of your eBike’s electrical system. Battery types include lithium-ion (Li-ion) and lithium-polymer (LiPo), with Li-ion being the most common and reliable choice. Consider the following battery factors:

• Capacity (measured in ampere-hours, Ah): Higher capacity batteries offer longer ranges.
• Voltage: Most eBikes use 36V or 48V systems.
• Weight: Heavier batteries can affect the bike’s handling.

Your choice of battery should align with your power and range requirements. A larger capacity battery will allow for extended rides, while a smaller one may be sufficient for shorter trips.

3. Installation Complexity and DIY vs. Professional Installation:

Consider your level of mechanical aptitude and willingness to tackle DIY projects. Conversion kits come with varying levels of installation complexity. Some may require advanced technical skills, including knowledge of bike mechanics and electrical systems. Others are designed for straightforward DIY installation.

If you’re unsure about your ability to install the kit correctly, it’s wise to opt for professional installation. Many local bike shops or eBike specialty stores offer conversion kit installation services for a fee. Ensuring a proper installation is essential for safety and optimal performance.

4. Compatibility with Your Bike Frame and Components:

Compatibility is paramount when choosing a conversion kit. Ensure that the kit you select is compatible with your bike’s frame size and design. Check the following aspects:

• Wheel size (front or rear wheel kit).
• Brake type (rim brakes or disc brakes).
• Frame geometry (especially for mid-drive kits).
• Bottom bracket type (for mid-drive kits).

Taking the time to confirm compatibility will prevent issues during the installation process and ensure that your converted eBike operates seamlessly with your existing components.

By carefully assessing your power and range requirements, battery preferences, installation capabilities, and compatibility with your bicycle, you can confidently choose the right eBike conversion kit. This thoughtful selection process will result in an electrified bike that meets your expectations and enhances your overall riding experience.

Installation Process

Converting your standard bicycle into an electrified wonder with an eBike conversion kit is an exciting endeavor. While the specific installation process can vary depending on the kit you choose, here’s a general overview to guide you through the steps:

Step 1: Gather Your Tools and Materials
Before you begin, ensure you have all the necessary tools and materials. Common tools required include wrenches, screwdrivers, pliers, Allen keys, and cable cutters. Additionally, make sure you have safety gear such as gloves and safety glasses. Your eBike conversion kit should include most of the components you need, but it’s a good idea to double-check.

Step 2: Remove the Existing Wheel (for Wheel Kits)
If you’re installing a front or rear-wheel conversion kit, start by removing the existing wheel from your bicycle. Follow these general steps:

• Release the brakes (if your bike has rim brakes).
• Loosen and remove the axle nuts or quick-release skewer.
• Carefully slide out the wheel.

Step 3: Attach the Motor Wheel (for Wheel Kits)
Next, attach the motorized wheel from your conversion kit. Ensure that the motor cable is routed correctly and securely connected to the controller. Depending on the kit, you may need to connect the throttle and brake sensors as well.

Step 4: Install the Battery and Controller
Mount the battery and controller securely on your bike. This can usually be done using mounting brackets or straps provided with the kit. Ensure all electrical connections are made correctly and securely, following the manufacturer’s instructions.

Step 5: Connect and Secure Wiring
Carefully route and connect all wiring, ensuring there are no loose or exposed wires. Use zip ties or cable clips to secure wires to the bike frame and prevent interference with moving parts like the chain and wheels.

Step 6: Test the System
Before you go for a ride, test the eBike’s electrical system. Check the throttle, brakes, and motor operation to ensure everything is functioning correctly. Pay special attention to brake cutoff switches that should deactivate the motor when the brakes are applied.

Step 7: Fine-Tune and Adjust
Take your bike for a short test ride in a safe and controlled environment. Pay attention to how the eBike handles and accelerates. Make any necessary adjustments to the motor’s power settings and the bike’s brakes and gears. Fine-tuning will help you achieve optimal performance and safety.

Tips and Precautions:

• Read the manufacturer’s instructions thoroughly before installation.
• Double-check all electrical connections to ensure they are secure.
• Be cautious of sharp edges and moving parts during installation.
• Consult a professional if you’re unsure about any step of the installation process.
• Regularly inspect and maintain your eBike after installation to ensure safe and reliable operation.

Specialized Tools or Skills:
While most eBike conversion kits are designed for DIY installation, you may require some basic mechanical and electrical skills. Depending on the complexity of the kit, specialized tools like torque wrenches or bottom bracket removal tools may be needed. If you’re uncomfortable with any aspect of the installation, consider professional assistance to ensure safety and reliability.

By following these steps, tips, and precautions, you can successfully install an eBike conversion kit and embark on your electrified cycling adventures with confidence.

Cost Considerations

When exploring the world of eBike conversion kits, it’s important to have a clear understanding of the various costs associated with this electrifying endeavor. Here’s a breakdown of the key cost considerations:

1. Kit Price:

The primary expense associated with eBike conversion is the cost of the conversion kit itself. The price of conversion kits can vary significantly depending on several factors:

• Kit Type: Front-wheel, rear-wheel, and mid-drive conversion kits have different price points, with mid-drive kits generally being more expensive due to their advanced technology.
• Brand and Quality: Well-known and reputable brands often command higher prices. However, they also tend to offer better build quality and customer support.
• Power and Features: Kits with higher power ratings and advanced features may be more expensive than basic kits.

It’s essential to set a budget and choose a kit that aligns with your financial constraints while meeting your performance and customization needs.

2. Additional Components:

In addition to the conversion kit itself, there are several supplementary components that you may need to purchase, which can impact the overall cost:

• Battery: Batteries are a significant cost factor. The price varies depending on the battery’s capacity (Ah) and voltage (V). Higher capacity batteries typically cost more but provide longer ranges.
• Charger: You’ll need a charger compatible with your battery. Chargers come in various types and price ranges, with faster chargers often costing more.
• Controller: Some kits may include a controller, but if not, you’ll need to purchase one separately. The controller manages the electrical system and motor.
• Accessories: Depending on your preferences, you may want to invest in accessories like fenders, lights, or a display unit, which can add to the overall cost.

Be sure to factor in the prices of these additional components when budgeting for your eBike conversion.

3. Maintenance and Repair Expenses:

While eBikes are generally low-maintenance compared to traditional vehicles, they are not maintenance-free. Consider the following maintenance and repair expenses:

• Tire and Tube Replacement: Just like with any bicycle, tires and tubes may need periodic replacement due to wear and tear.
• Brake Pads: Electric bikes may put more strain on brakes due to their higher speeds. You may need to replace brake pads more frequently.
• Battery Replacement: Over time, the battery’s capacity may degrade, necessitating replacement, which can be a significant expense.
• Motor and Electrical Components: Although electric motors are known for their durability, they are not immune to wear and tear. Depending on usage, you may need to replace motor components or the controller.
• Professional Maintenance: While some maintenance can be DIY, there may be instances where you require professional bike or electric system maintenance services, which come with associated costs.

Budgeting for regular maintenance and potential repair expenses is essential to ensure the long-term reliability and performance of your eBike.

By carefully considering the kit price, additional component costs, and potential maintenance and repair expenses, you can create a comprehensive budget for your eBike conversion project and make informed financial decisions to enjoy the electrified cycling experience to the fullest.

Riding Experience

The riding experience of an eBike after conversion is nothing short of transformative. It seamlessly combines the joy of cycling with the thrill of effortless propulsion, offering riders an exhilarating journey that’s both efficient and enjoyable. Here’s an overview of what you can expect from the eBike riding experience post-conversion:

Effortless Acceleration:
One of the most striking features of an eBike is the effortless acceleration. As you start pedaling or engage the throttle, the electric motor kicks in, providing a smooth and immediate boost of power. It’s like having a tailwind at your back, making every start from a standstill or ascent up a hill feel surprisingly easy.

Enhanced Speed and Range:
With an eBike conversion kit, you’ll notice a significant increase in speed compared to a conventional bicycle. Depending on the power and speed settings of your kit, you can effortlessly reach speeds of up to 20-28 mph (32-45 km/h) or even higher. This enhanced speed allows you to cover longer distances in less time, making eBikes an excellent choice for commuting, touring, and exploration.

Customizable Power Levels:
Most eBike conversion kits offer customizable power levels, allowing you to tailor your riding experience to your preferences and needs. You can choose between various assistance modes, from minimal help to full electric power, giving you control over the level of exercise you want while riding.

Improved Climbing Capability:
Hills and steep inclines that used to be daunting challenges on a traditional bike become conquerable feats on an eBike. The electric motor provides a consistent and powerful push, making hill climbing a breeze.

Quiet and Smooth Operation:
Electric motors on eBikes operate quietly, ensuring a peaceful and enjoyable ride. The absence of noisy engines or exhaust makes for a serene and eco-friendly commuting experience.

User Testimonials and Experiences:
Countless eBike enthusiasts have shared their experiences, and many have attested to the life-changing benefits of eBike conversion kits. Here are a few user testimonials:

• John: “I converted my old mountain bike into an eBike for my daily commute. It’s been a game-changer. I arrive at work faster, less tired, and in a much better mood.”
• Lisa: “As a recreational cyclist, I love exploring new trails on my converted eBike. It allows me to go on longer rides and enjoy the scenic routes without worrying about exhausting myself.”
• David: “I was skeptical at first, but after converting my cruiser into an eBike, I can’t imagine going back. It’s a blast to ride, and I’ve even convinced my friends to try it out!”

In conclusion, the riding experience of an eBike after conversion is marked by enhanced speed, reduced effort, and a sense of liberation. It opens up new possibilities for commuting, touring, and recreational cycling while maintaining the core elements of a traditional bike ride. The countless positive user testimonials and experiences underscore the profound impact that eBikes can have on individuals’ lifestyles and overall well-being.

Maintenance and Troubleshooting

Maintaining and caring for your eBike after conversion is essential to ensure its long-term reliability and performance. Here’s a comprehensive guide on how to keep your electrified ride in top shape:

Maintenance:

1. Regular Cleaning:

• Clean your eBike regularly, especially after riding in muddy or dusty conditions. Use a mild detergent and a soft brush to remove dirt and grime.
• Pay attention to the chain, drivetrain, and brake components, as these areas tend to accumulate debris.

2. Tire Maintenance:

• Check tire pressure regularly and maintain it within the recommended range. Proper tire pressure ensures a comfortable ride and helps prevent flats.
• Inspect the tires for signs of wear and replace them if they’re excessively worn or damaged.

3. Chain Lubrication:

• Keep the chain well-lubricated to prevent corrosion and ensure smooth shifting. Use a quality bicycle chain lubricant and wipe off excess oil to avoid attracting dirt.

4. Battery Care:

• Store your eBike in a cool, dry place when not in use. Extreme temperatures, especially heat, can adversely affect the battery’s lifespan.
• Charge the battery regularly, even during periods of non-use, to maintain its capacity. Most manufacturers recommend charging it at least once a month.

5. Brake Maintenance:

• Check brake pads for wear and replace them if they are worn down to the wear indicators.
• Inspect brake cables and hydraulic lines for signs of damage or corrosion, and replace them as needed.

Troubleshooting Common Issues:

1. Battery Issues:

• If your battery’s range has significantly decreased, it may be time for a replacement.
• If the battery doesn’t charge or hold a charge, check the charger, charging port, and connectors for damage.

2. Motor Problems:

• If the motor stops working, check the wiring connections and ensure they are secure.
• Inspect the motor for debris or obstructions that may impede its operation.

3. Brake Problems:

• If your brakes feel spongy or lack stopping power, bleed the brake lines if you have hydraulic disc brakes or adjust cable tension for mechanical brakes.
• If the brakes squeal or rub, adjust the brake pads to ensure they are aligned properly with the rotor.

4. Noise or Vibration:

• Unusual noises or vibrations may indicate loose bolts or components. Inspect the frame, handlebars, and other parts for tightness.

5. Display and Control Issues:

• If your eBike’s display or controls malfunction, check the wiring connections and ensure they are securely plugged in.
• Reset the display to factory settings, if applicable, and follow the manufacturer’s instructions for troubleshooting.

Importance of Periodic Check-Ups:

Regular check-ups by a qualified eBike technician are essential to catch and address potential issues before they become major problems. These check-ups may include:

• Battery health assessments.
• Diagnostic tests for electrical components.
• Thorough safety inspections.
• Lubrication and adjustment of critical parts.
• Firmware or software updates for electronic components.

By following these maintenance tips, troubleshooting common issues, and scheduling periodic check-ups with a professional technician, you can enjoy a safe, reliable, and trouble-free eBike riding experience long after your conversion.

Legal and Safety Considerations

When it comes to eBikes, understanding and adhering to legal regulations and safety measures are paramount to ensure a safe and enjoyable riding experience. Here’s an overview of the key considerations:

1. Legal Regulations:

Legal regulations regarding eBikes vary by region, country, and even state or municipality. It’s crucial to be aware of and comply with the specific laws in your area. Common regulations include:

• Classifications: eBikes are often classified into three categories based on their power and speed capabilities. Class 1 eBikes provide pedal assistance up to 20 mph (32 km/h), Class 2 eBikes have a throttle and may also reach 20 mph, and Class 3 eBikes offer pedal assistance up to 28 mph (45 km/h).
• Age Restrictions: Some regions have age restrictions for riding eBikes, typically requiring riders to be at least 16 or 18 years old.
• Helmet Laws: Helmet requirements can vary, with some areas mandating helmet use for all eBike riders, while others apply it to specific age groups or classifications.
• Bike Lane and Road Usage: Regulations often dictate where eBikes are permitted, such as bike lanes, roads, or multi-use paths. Some areas may restrict eBikes from certain trails or pedestrian-only zones.
• Maximum Motor Power: There may be limits on the maximum power output (in watts) allowed for eBike motors.
• Licensing and Registration: Regulations may require licensing or registration for certain eBike classes, especially those with higher speeds.

Always check with your local authorities or government transportation websites to understand the specific regulations applicable to your region.

2. Safety Gear:

Ensuring your safety while riding an eBike is of utmost importance. Here are some key safety gear considerations:

• Helmets: Regardless of local helmet laws, wearing a properly fitted helmet is a crucial safety measure when riding an eBike. Choose a helmet that meets safety standards and fits snugly on your head.
• Lights and Reflectors: Adequate lighting is essential for visibility, especially when riding in low-light conditions or at night. Equip your eBike with front and rear lights, as well as reflectors, to make yourself visible to others on the road.
• Protective Clothing: Consider wearing protective clothing, such as gloves, knee and elbow pads, and reflective clothing, to enhance safety.
• Mirrors: Adding mirrors to your eBike can improve your situational awareness and help you monitor traffic behind you.

3. Responsible Riding:

Responsible riding practices not only keep you safe but also contribute to positive interactions with other road users. Here are some tips for responsible eBike riding:

• Obey Traffic Rules: Follow all traffic signals, signs, and rules, just as you would with a regular bicycle or vehicle.
• Yield to Pedestrians: Be courteous to pedestrians, and yield the right of way when appropriate.
• Use Hand Signals: Signal your intentions with hand signals to indicate turns and stops.
• Stay in Control: Be aware of your speed, especially in crowded areas or on busy streets. Maintain control of your eBike at all times.
• Avoid Distractions: Refrain from using electronic devices or headphones while riding.
• Stay Informed: Keep up to date with any changes in local regulations or safety recommendations.

By understanding and adhering to legal regulations, prioritizing safety gear, and practicing responsible riding, you can enjoy your eBike to the fullest while minimizing risks and contributing to safer roads for everyone.

Conclusion

In the journey of exploring eBike conversion kits, we’ve uncovered a world of electrifying possibilities that blend the best of both the traditional and modern cycling realms. To recap, here are the key takeaways from our discussion:

• The Rise of eBikes: We’ve witnessed the burgeoning popularity of eBikes, driven by their environmental benefits, health advantages, and increased demand for sustainable urban transportation solutions.
• eBike Conversion Kits: These ingenious kits offer an accessible entry point into the eBike revolution. They allow you to transform your beloved traditional bicycle into an electrified wonder, preserving familiarity while enhancing your riding experience.
• Benefits of eBike Conversion Kits: These kits offer cost savings compared to buying a new eBike, customization options, and the eco-friendly practice of repurposing old bikes. They empower you to tailor your eBike to your unique needs and preferences.
• Choosing the Right Conversion Kit: To ensure a successful conversion, consider factors such as power and range requirements, battery types, installation complexity, and compatibility with your bike frame and components.
• Riding Experience: Riding an eBike post-conversion promises effortless acceleration, improved speed and range, customizable power levels, enhanced climbing capability, and a quiet, smooth operation. User testimonials underscore the positive impact of electrified cycling.
• Maintenance and Troubleshooting: Regular maintenance, troubleshooting, and periodic check-ups are essential to keep your eBike in top condition and address common issues promptly.
• Legal and Safety Considerations: Complying with local regulations, wearing safety gear like helmets and lights, and practicing responsible riding habits are critical for a safe and enjoyable eBike experience.

In conclusion, eBike conversion kits not only represent a cost-effective and sustainable way to embrace the eBike movement but also offer a chance to reinvent your cycling adventures. By converting your existing bicycle, you’ll enjoy the myriad benefits of electrified cycling while retaining the charm and familiarity of your trusted ride.

We encourage you to explore the world of eBiking and consider converting your own bike.

Whether it’s for daily commuting, scenic touring, or simply experiencing the thrill of effortless pedaling, eBike conversion kits open the door to a new era of cycling, where convenience, sustainability, and exhilaration seamlessly converge.

Embrace the change, electrify your ride, and embark on a journey of exploration and enjoyment like never before.